SteadyOptions is an options trading forum where you can find solutions from top options traders. TRY IT FREE!

We’ve all been there… researching options strategies and unable to find the answers we’re looking for. SteadyOptions has your solution.

Put/Call Parity - Two Definitions


Put/call parity is a term options traders use to mean one of two things. The simplest definition and the one most applicable to most options traders compares the similarity in the bid/ask spread and the net debit or credit resulting from this.

When traders use different options with the same net price (whether long or short and involving calls or puts), the degree of net debit or credit differences often defines potential profit or loss. If the two sides are at net zero difference, the position is at parity.
 

The bid/ask spread defines a series of options in terms of how popularly they are being traded, and how expensive or cheap they are. A very narrow spread is the result of a high volume of trading, but everyone has seen examples of very wide spreads. Invariably, this is found when little or no active trading is going on. This reveals that traders know the current pricing of the option is not a good deal. That usually results from a combination of moneyness and timing to expiration. The more remote the possibility of profit, the less reason there is to make a trade at all. And this is reflected in the bid/ask spread.

When the net spread is identical (at parity), what does it mean? This is seen when a bid price is reduced by the trading fee, and the offsetting ask price is increased. An example of parity:

  •  Bid price 1.15 and trading fee is 0.05. Net is 1.10 ($110).
  •  Ask price is 1.05 and trading fee is 0.05. Total is 1.19 ($110).

The net of both sides is identical; under this simplified definition of parity, the net debit or credit is zero.


This applies, for example, in a synthetic long stock trade. With a 60 strike, the following positions are possible:

  • Buy 60 call, ask 1.25 plus trading fee = 1.30
  • Sell 60 put, bid 1.35 less trading fee = 1.30

For the trader of the long synthetic, the positions starts out at parity, so there is no debit or credit. As the underlying price rises, the long call matches point for point and the short put loses time value, eventually expiring worthless. If the underlying declines, the long call loses value and the short put gains value. As this occurs, the appreciated short put represents a point-for-point net loss identical to the decline in stock. The advantage here is that the trader can roll out of the put and delay exercise.
 

The same comparison works for a synthetic short stock trade. Parity occurs when the net of a long put and a short call is zero. Parity as a trading ides matters because setting up a trade with a net credit provides flexibility for profits, but a net debit means more points must be earned before breakeven and profit become profitable. This argument works not only in synthetic trades but also in any straddle or other offsetting combination trade.
 

The more complex definition of parity considers the present value based on European style options. Exercise is allowed only at or close to expiration date. The purpose of this is to determine whether the calculated parity justifies the trade. The farther away the expiration date, the greater the impact of present value.
 

The formula for the complex version of parity is:

                ( C + X ) ÷ ( 1 + r )t =P + U

            C = premium of the call

            X = strike

            R = interest rate

            t = time to expiration

            P = premium of the put

            U = underlying price

 

This formula might seem complex for what could be a small difference between he two sides. But when working with many contracts on each side of the trade, and when expiration is distant, calculated parity becomes a determining factor. It applies in arbitrage trading with options and with any strategies designed to set up riskless profits. For most options traders, especially those working with relatively short-term expiration cycles, reliance is on rapid time decay (for short trades) or time management (for long trades).

Parity defines the practicality of such combinations for calculating the likelihood of profit, a form of arbitrage in the extreme short term. The advanced method is appropriate for larger block trades and in cases where long-term options are used as part of contingent buy or sell forms of risk management. It is inaccurate when applied to American style options unless those options are kept open to last trading day, which happens only in a minority of cases. The present value calculation also fails to take dividends into account, which will distort the outcome when traders hold the underlying in addition to trading options.

 

This distinction between a spread and parity is important in another way as well. Many pricing calculations of options are based on the mid-point between bid and ask. This makes no sense. No traders – buyers or sellers – ever trader at the  mid-pint. They either buy at the ask or sell at the bid. Thus, the mid-point is always an inaccurate version of “price.” Premium value should involve separate calculations, one based on big (for sellers) and another based on ask (for buyers). This misguided application of mid-point often is used in calculating probability. As a result, probability is always misrepresented as a detriment to one or both sides of a trade. A fully accurate report of probability would be based on two calculations, and only when both sides are at parity would the result be realistic.
 

Calculation of parity in its simple form is good enough for most people. When variations such as time positions are closed, whether dividends are earned, and the degree bid/ask spread and its effect on probability, are also considered, parity becomes a more complex issue. In its most simplified form, it defines the net difference or similarity between net bid and ask. For calculations of probability, the mid-point is a complete inaccurate measure in every case, whether options are at parity or widely divergent.

 
Michael C. Thomsett is a widely published author with over 80 business and investing books, including the best-selling Getting Started in Options, coming out in its 10th edition later this year. He also wrote the recently released The Mathematics of Options. Thomsett is a frequent speaker at trade shows and blogs on his websiteat Thomsett Guide as well as on Seeking Alpha, LinkedIn, Twitter and Facebook.

 

           

 

What Is SteadyOptions?

Full Trading Plan

Complete Portfolio Approach

Diversified Options Strategies

Exclusive Community Forum

Steady And Consistent Gains

High Quality Education

Risk Management, Portfolio Size

Performance based on real fills

Try It Free

Non-directional Options Strategies

10-15 trade Ideas Per Month

Targets 5-7% Monthly Net Return

Visit our Education Center

Recent Articles

Articles

  • Bullish Short Strangles

    A bullish short strangle sounds like a complicated strategy, but it’s really quite simple for those familiar with option terminology. A short put is combined with a short call to where the position starts with some amount of positive delta overall. This distinguishes itself from a delta neutral strangle, where both the short put and short call are sold at the same delta.

    By Jesse,

    • 0 comments
    • 65 views
  • Eight Mistakes Every Forex Trader Should Avoid

    The forex market is currently the largest financial market in the world and, due to its highly liquid nature and low barriers to entry, is only expected to grow. Becoming a forex trader requires minimal effort and with a decent internet connection, a laptop or computer, and some spare money to invest, you can start in no time.

    By Kim,

    • 0 comments
    • 62 views
  • Put/Call Parity - Two Definitions

    Put/call parity is a term options traders use to mean one of two things. The simplest definition and the one most applicable to most options traders compares the similarity in the bid/ask spread and the net debit or credit resulting from this.

    By Michael C. Thomsett,

    • 0 comments
    • 235 views
  • Put Selling: Strike Selection Considerations

    When selling puts, such as we do in our Steady Momentum PutWrite strategy, there are many questions a trader must answer: What expiration should I use? What strike should I sell? Should I choose that strike based on delta or percentage out of the money?

    By Jesse,

    • 0 comments
    • 261 views
  • What Can We Learn From UBS YES Lawsuit?

    News followers may have seen the recent stories on UBS being sued by its clients and investors who participated in UBS’s “Yield Enhancement Strategy (YES).”  Evidently, numerous UBS clients signed up to participate in an iron condor strategy that lost a lot of money.They’re angry, and they’re filing a lawsuit.

    By cwelsh,

    • 2 comments
    • 870 views
  • Pinning Down the ‘Option Pinning’

    What many people on SO have in common is that they have read the books of Jeff Augen on options trading. Although written a decade ago they continue to be an interesting source of strategies for the retail investor. Retail investors have particular constraints that make most of the broad theoretical musings on options rather moot.

    By TrustyJules,

    • 0 comments
    • 373 views
  • Holding Positions into Expiration

    "Every once in a while you must go to cash, take a break, take a vacation. Don't try to play the market all the time. It can't be done, too tough on the emotions." - Jesse Livermore

    By Mark Wolfinger,

    • 0 comments
    • 296 views
  • Tales Of How Big Trades Went Wrong

    One way to learn from your past mistakes is having to go through the painful and challenging experience of explaining them. Another way is to listen to others who might have lived through some disgruntling trades. Joseph Trevisani goes deep into the rationale he followed during the volatile EUR/JPY days of 2007 in this article.

    By Kim,

    • 0 comments
    • 307 views
  • Covered Straddle Explained

    The covered straddle is a perfect strategy for those all too common sideways-moving trends. When a company’s stock is in consolidation, how can you make trades? No directional trend exists, so most traders simply wait out this period.

    By Michael C. Thomsett,

    • 0 comments
    • 456 views
  • Why Doesn't Anchor Roll The Long Calls?

    Recently, an Anchor subscriber asked, “Why don’t we roll the long calls in the Leveraged Anchor portfolio after a large gain and take cash off the table?”  This question has a multi-part answer, from taxation to how the delta on a position works.

    By cwelsh,

    • 0 comments
    • 286 views

  Report Article

We want to hear from you!


There are no comments to display.



Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy and free!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

Options Trading Blogs